Making the Drawers
There are six drawers that fit into the drawer housing. Although the dimensions of the two bottom drawers differ from those of the four top drawers, each drawer is constructed identically. An assembly diagram is shown in Figure 13. 1. Rip 20 linear feet of 1 x 8 pine to 6-1 2 inches in width. 2. Cut the following pieces from the ripped pine to construct one of the four upper drawers two drawer front back pieces V , each 11-3 4 inches long, and two drawer sides W , each 16 inches long. 3. Cut a...
Adding the Trim Emk
1. Cut two short trim pieces E from 1x4 rough cedar, each 12-1 2 inches long. 2. Cut two long trim pieces F from 1x4 rough cedar, each 51 inches long. 3. Attach the short trim pieces E flush with the top of the planter side sections, overlapping the ends of the front and back sections, as shown in Figure 3. Use exterior glue and 2-1 2-inch-long screws, inserting at least two screws into each vertical A . 4. Again using exterior glue and at least two 2-1 2-inch-long screws for each vertical A ,...